Skip To Content

Catalog

Ballast bypass required.
Unit of Measure

Specifications

Brands

N/A GE®

Fixture Rating

N/A Open and Enclosed Rated

Input Voltage

N/A 277 to 480 V

Replacement Watts

N/A 1,000 W

Design Lights Consortium (DLC)

N/A Yes
Location Rating1 N/A Damp

Product Information - Case

Case - Standard Package Quantity2 N/A 3

Dimensions

Maximum Overall Length (MOL)

N/A 12.2 in

Maximum Overall Depth (MOD)

N/A 5.5 in

Photometric Characteristics

Nominal Initial Lumens

N/A 40000 lm

Color Temperature

N/A 5000 ºK

Color Rendering Index (CRI)

N/A >70

General Characteristics

Lamp Code

N/A LED270BT56/750
Rated Life3 N/A 50,000 hours
  • 1 UL 1993 Environmental Requirements for LED LAMPS
    Location, damp - Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to, electrical equipment, and includes partially protected locations.
    Location, dry - Location not normally subject to dampness, may include a location subject to temporary dampness, i.e., building under construction, provided ventilation is adequate to prevent an accumulation of moisture.
    Location, wet - Location in which water or other liquid can drip, splash, or flow on or against electrical equipment.

    Not suitable for air-tight explosive or hazardous fixtures.
    GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of the General Electric Company. © 2019 GE.
    LEDL051 (Rev 03/28/2019)
  • 2 Minimum order quantity = 1
  • 3 The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original rating (L70)